Sidebar
power_settings
This is an old revision of the document!
Below are power settings for common materials.
- 1/8 in (3 mm) Cast Acrylic
- 1/4 in (6 mm) Cast Acrylic
- 1/8 in (3 mm) Plywood
- 1/4 in (6 mm) Plywood
- Glass
- Powder Coating
- Leather
- Granite
- Marble
- Melamine
- Rubber Stamps
- Cork
- Corian
1/8 in (3 mm) Cast Acrylic
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 70/70 | 55/55 | / | / |
| Speed (Cut/Engrave) | 12/300 | 12/300 |
1/4 in (6 mm) Cast Acrylic
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/8 in (3 mm) Plywood
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/4 in (6 mm) Plywood
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Glass
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Engrave) |
Powder Coating
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Leather
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Granite
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Marble
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Melamine
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Rubber Stamps
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Cork
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Corian
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
power_settings.1616126534.txt.gz · Last modified: 2021/03/18 23:02 by admin
