Sidebar
power_settings
This is an old revision of the document!
Below are power settings for common materials.
1/8“ (3 mm) Cast Acrylic
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/4” (6 mm) Cast Acrylic
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/8“ (3 mm) Plywood
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/4” (6 mm) Plywood
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
power_settings.1610874918.txt.gz · Last modified: 2021/01/17 03:15 by admin
