Differences

This shows you the differences between two versions of the page.

--- mods_wifi [2020/09/27 23:54]
admin
+++ mods_wifi [2020/09/28 00:00] (current)
admin [Software Setup]
@@ Line 28: / Line 28: @@
 In LightBurn, click //Devices// and choose //Create Manually//.  I suggest naming this the same as your USB connection but with (Networked) or (WiFi) or something to that effect at the end.  Next, select //Ruida// for the type of controller, and //Ehternet/UDP// for the connection type.  Enter the IP address that was configured in your WiFi to Ethernet adapter and on the machine.  Follow the remaining prompts to enter your machine dimensions.  After configuration, you will be able to select the new device with the networked connection.  To test the connection, try jogging the laser head.
-In RDWorks, in the Device panel, click //Setting//.  Now choose //Add//.  Give it a name.  Again, I suggest the same name but with something added at the end to indicate it's networked, such as (WiFi).  Under //Web//, enter the IP address you previously configured.  Click //Test// to test the connection.  Then click //OK//.  You will now be able to choose the connection in the Device panel.
+In RDWorks, in the Device panel, click //Setting//.  Now choose //Add//.  Give it a name.  There is no need to append (WiFi) since RDWorks will display the IP Address next to the name automatically.  Under //Web//, enter the IP address you previously configured.  Click //Test// to test the connection.  Then click //OK//.  You will now be able to choose the connection in the Device panel.

X700 Lasers

User Tools

Site Tools

Differences

Page Tools